×
samer abedallah alsiad
• Mechanical Engineering - Faculty Member

  • Ph.D. of Mechanical Engineering from University of Cincinnati, 1994
  • Msc. of Mechanical Engineering from Jordan University of Science and Technology, 1990
  • Bsc. of Mechanical Engineering from Yarmouk University, 1987

    Publications
  • Al-Said, S.M. and Abu-Nabah, B.A., "A Simple Algorithm Based on a 2D Heat Diffusion Mathematical Model to Extract a Surface Crack Length from a Sonic IR Thermal Image Alone," Journal of Nondestructive Evaluation, vol. 40, no. , pp. 0-0, 2021
  • Barakat, N. and Mortadha, J. and Khan, A. and Abu-Nabah, B.A. and Hamdan, M.O. and Al-Said, S.M., "A one-dimensional approach towards edge crack detection and mapping using eddy current thermography," Sensors and Actuators, A: Physical, vol. 309, no. , pp. 0-0, 2020
  • Abu-Nabah, B.A. and Al-Said, S.M. and Gouia-Zarrad, R., "A simple heat diffusion model to avoid singularity in estimating a crack length using sonic infrared inspection technology," Sensors and Actuators, A: Physical, vol. 293, no. , pp. 77-86, 2019
  • Abu-Nabah, B.A. and Al-Said, S.A.M., "Sonic IR crack size estimation using 2D heat diffusion model with arbitrary heat source function along the crack," Quantitative InfraRed Thermography Journal, vol. 15, no. , pp. 271-290, 2018
  • Al-Said, S.A.M., "Crake effect on the dynamic characteristics of elastically coupled beams," Applied Mechanics and Materials, vol. 110-116, no. , pp. 328-336, 2012
  • Masoud, A.A. and Al-Said, S., "A new algorithm for crack localization in a rotating timoshenko beam," JVC/Journal of Vibration and Control, vol. 15, no. , pp. 1541-1561, 2009
  • Al-Said, S.M., "Crack detection in stepped beam carrying slowly moving mass," JVC/Journal of Vibration and Control, vol. 14, no. , pp. 1903-1920, 2008
  • Al-Said, S.A.M. and Al-Qaisia, A.A., "Influence of crack depth and attached masses on beam natural frequencies," International Journal of Modelling and Simulation, vol. 28, no. , pp. 239-247, 2008
  • Al-Said, S.M., "Crack identification in a stepped beam carrying a rigid disk," Journal of Sound and Vibration, vol. 300, no. , pp. 863-876, 2007
  • Al-Said, S.M. and Naji, M. and Al-Shukry, A.A., "Flexural vibration of rotating cracked Timoshenko beam," JVC/Journal of Vibration and Control, vol. 12, no. , pp. 1271-1287, 2006
  • Masoud, S.A. and Al-Huniti, N.S., "Effect of support stiffness on the stability of a rotor system with blade flexibility," International Journal of Modelling and Simulation, vol. 25, no. , pp. 127-134, 2005
  • Masoud, S.A. and Masoud, A.A., "Motion planning in the presence of directional and regional avoidance constraints using nonlinear, anisotropic, harmonic potential fields: A physical metaphor," IEEE Transactions on Systems, Man, and Cybernetics Part A:Systems and Humans., vol. 32, no. , pp. 705-723, 2002
  • Al-Nimr, M.A. and Hassan, A. and Masoud, S., "Diffusion bonding in multi-layers systems," Heat and Mass Transfer/Waerme- und Stoffuebertragung, vol. 37, no. , pp. 271-273, 2001
  • Masoud, S.A. and Hassan, A.M. and Al-Nimr, M.A., "Mass diffusion into two-layer media," Warme- und Stoffubertragung Zeitschrift, vol. 36, no. , pp. 173-176, 2000
  • Naji, M. and Al-Nimr, M. and Masoud, S., "Transient thermal behavior of a cylindrical brake system," Warme- und Stoffubertragung Zeitschrift, vol. 36, no. , pp. 45-49, 2000
  • Masoud, S.A. and Al-Nimr, M.A. and Alkam, M.K., "Transient film condensation on a vertical plate imbedded in porous medium," Transport in Porous Media, vol. 40, no. , pp. 345-354, 2000
  • Masoud, A.A. and Masoud, S.A., "Motion planning in the presence of directional and obstacle avoidance constraints using nonlinear, anisotropic, harmonic potential fields," Proceedings-IEEE International Conference on Robotics and Automation, vol. 3, no. , pp. 2944-2951, 2000
  • Masoud, S.A. and Masoud, A.A., "Constrained motion control using vector potential fields," IEEE Transactions on Systems, Man, and Cybernetics Part A:Systems and Humans., vol. 30, no. , pp. 251-272, 2000
  • Al-Nimr, M.A. and Masoud, S., "Unsteady free convection flow over a vertical flat plate immersed in a porous medium," Fluid Dynamics Research, vol. 23, no. , pp. 153-160, 1998
  • Masoud, S. and Jarrah, M.A. and Al-Maamory, M., "Effect of crack depth on the natural frequency of a prestressed fixed-fixed beam," Journal of Sound and Vibration, vol. 214, no. , pp. 201-212, 1998
  • Al-Nimr, M.A. and Masoud, S.A., "Nonequilibrium laser heating of metal films," Journal of Heat Transfer, vol. 119, no. , pp. 188-190, 1997
  • Khader, N. and Masoud, S., "Vibration of mistuned bladed disks supported by flexible continuous shafts," Journal of Sound and Vibration, vol. 149, no. , pp. 471-488, 1991
  • Al-Said, S.A.M. and Al-Huniti, N.S., "Modeling of flexible blade rigid-disk flexible shaft rotor system supported by elastic bearings: Stability analyses," , 2004, pp. 645-653
  • Masoud, A.A. and Masoud, S.A., "Integrating directional constraints in intelligent, hybrid, PDE-ODE motion controllers," , 1998, pp. 866-867
  • Masoud, Ahmad A. and Masoud, Samer A., "Intelligent, evolutionary, hybrid, PDE-ODE controller for navigation in unknown environments," , 1998, pp. 565-569
  • Masoud, Ahmad A. and Masoud, Samer A., "Modified, hybrid, PDE-ODE controller with integrated directional and region avoidance constraints," , 1998, pp. 2021-2022
  • Masoud, Ahmad A. and Masoud, Samer A., "Self-organizing, hybrid, PDE-ODE structure for motion control in informationally-deprived situations," , 1998, pp. 2535-2540
  • Masoud, Samer and Khader, Naim, "Stability analysis for unsymmetrical shaft with flexible bladed-disk," , 1997, pp. 0-0
  • Masoud, S. and Khader, N., "Stability analysis for unsymmetrical shaft with flexible bladed-disk," , 1997, pp. 0-0
  • Masoud, Ahmad A. and Masoud, Samer A., "Evolutionary action maps for navigating a robot in an unknown, multidimensional, stationary environment, Part II: Implementation and results," , 1997, pp. 2090-2096
  • Masoud, Ahmad A. and Masoud, Samer A. and Bayoumi, Mohamed M., "Robot navigation using a pressure generated mechanical stress field - `The biharmonic potential approach'," , 1994, pp. 124-129
  • Khader, N. and Masoud, S., "The assumed mode method in structural dynamics of bladed-disk-shaft systems," , 1990, pp. 0-0
  • Khader, Naim and Masoud, Samer, "Assumed mode method in structural dynamics of bladed-disk-shaft systems," , 1990, pp. 0-0
  • "A Simple Algorithm Based on a 2D Heat Diffusion Mathematical Model to Extract a Surface Crack Length from a Sonic IR Thermal Image Alone", Journal of Nondestructive Evaluation
  • "A one-dimensional approach towards edge crack detection andmapping using eddy current thermography", Sensors and Actuators A: Physical
  • "A simple heat diffusion model to avoid singularity in estimating a crack length using sonic infrared inspection technology", Sensors and Actuators A: Physical
  • "Physics-based thermal noise effect reduction in sonic IR crack length estimation", Nondestructive Testing and Evaluation
  • "Sonic IR crack size estimation using 2D heat diffusion model with arbitrary heat source function along the crack", Quantitative Infra Red Thermography Journal
  • Head of Department, Mechanical Engineering, Sep 2002 - Sep 2003
  • Faculty Member, Mechanical Engineering, Jun 1995 - Present
  • Full-time Lecturer, Mechanical Engineering, Feb 1995 - Jun 1995
  • visiting professor, Alfaisal University, Saudi Arabia, Aug 2019- Aug 2021
  • Visiting professor, American University of Sharjah, United Arab Emirates, Aug 2015- Aug 2016
  • Professor, Jordan University of Science and Technology, Jordan, Jan 2008-Present
  • Visiting Associate Professor, King Saud University, Jordan, Sep 2003- Sep 2007
  • Associate Professor , Jordan University of Science and Technology, Jordan, Feb 2000- Jan 2008
  • Assistant Professor, Jordan University of Science and Technology, Jordan, Feb 1995- Feb 2000
  • ADVANCED VIBRATIONS
  • DYNAMICS
  • ENGINEERING MECHANICS
  • ENGINEERING PRACTICE
  • ENGINEERING TRAINING
  • INSTRUMENTATION AND DYNAMIC SYSTEMS
  • INSTRUMENTATION AND DYNAMIC SYSTEMS LAB
  • INSTRUMENTATION LAB
  • MACHINE DESIGN ( 1)
  • MACHINE DESIGN (2)
  • MECHANICAL VIBRATIONS
  • MECHANICS OF MATERIALS
  • PERTURBATION METHODS
  • STATICS
  • STRENGTH OF MATERIALS
  • Numerical Methods in Engineering
  • Finite Element
  • Mechanical Engineering Design I