noor abdullah al-mortadi
• Department of Applied Dental Sciences - Faculty Member
-
-
-
-
-
- Ph.D. of Dental Technology from Cardiff University, 2014
- Msc. of Dental Technology from University of Dundee, 2009
Publications
-
Noor Al Mortadi, Jeffrey Lewis, Quinten John, Dominic Eggbeer, Robert Williams
, "Fabrication of a resin appliance with alloy components using digital technology without an analog impression," American Journal of orthodontics and dentofacial orthopedics, vol. 148, no. 5, pp. 862-867, 2015
-
Noor Al Mortadi, Jeffrey Lewis, Dominic Eggbeer, Robert Williams
, "CAD/CAM/AM applications in the manufacture of dental appliances," American Journal of orthodontics and dentofacial orthopedics, vol. 142, no. 5, pp. 727-733, 2012
-
Noor Al Mortadi, Dominic Eggbeer, Jeffrey Lewis, Robert Williams
, "Design and fabrication of a sleep apnea device using computer-aided design/additive manufacture technologies," Proceeding of the institution of mechanical engineers. Part H: Journal of Engineering in Medicine, vol. 227, no. 4, pp. 350-355, 2013
-
Noor Al Mortadi, Graham Chadwick
, "Disinfection of dental impressions - compliance to accepted standards.," British Dental Journal, vol. 209, no. 12, pp. 707-611, 2010
-
Normal
0
false
false
false
EN-US
X-NONE
AR-SA
, "Comparison of virtual and physical dimensions in AM resin dental devices and fit of devices with conventionally produced base plates," Rapid Prototypin Journal, vol. 24, no. 1, pp. 188-194, 2017
-
Noor Al Mortadi,1 Omar F Khabour,2 Karem H Alzoubi3, "Considerations and beliefs in tooth donation to research in Jordan," Clinical, Cosmetic and Investigational Dentistry, vol. 10, no. , pp. 263-268, 2018
-
Lucie Zuskova,1 Noor A. Al Mortadi,2 Robert J. Williams,1 Karem H. Alzoubi,3 and Omar F. Khabour, "Comparison of Overall Fit of Milled and Laser-Sintered CAD/CAM Crown Copings," International Journal of Dentistry, vol. 2019, no. , pp. 0-0, 2019
-
Noor Al Mortadi, Aceil Al-Khatib, Karem H Alzoubi, Omar F Khabour, "Disinfection of dental impressions: knowledge and practice among dental technicians," Clinical, Cosmetic and Investigational Dentistry, vol. 11, no. , pp. 103-108, 2019
-
ahaRababaha,?, MuhammadAl-U'datta<, "Effect of storage of Halaweh tahinia on physicochemical andnutraceutical properties," Annals of Agricultural Sciences, vol. , no. , pp. 0-0,
-
Noor Al Mortadi, Karem H Alzoubi, Robert Williams, "A Scoping Review on the Accuracy of Fit of Removable Partial Dentures in a Developing Digital Context," Clinical, Cosmetic and Investigational Dentistry, vol. 12, no. , pp. 551-562, 2020
-
Normal
0
false
false
false
EN-US
X-NONE
AR-SA
, "Fatigue Failure Load of Molars with Thin-walled Prosthetic Crowns Made of Various Materials: A 3D-FEA Theoretical Study," Clinical, Cosmetic and Investigational Dentistry, vol. , no. , pp. 0-0, 2020
-
Noor Al Mortadi, Computer Aided Design/Aided Manufacture/Additive Manufacturing applications in the manufacture of dental appliances, , 2014
-
Noor Al Mortadi, The need for and effects upon dental impression and laboratory die materials of an alternative prion disinfection regime, , 2009
-
"A Three ? Dimensional Finite Element Analysis of Polyetheretherketone PEEK in Dental Implant Prosthesis: A Novel Implant System", The Open Dentistry Journal
-
"Arch Measurement Changes upon Biomimetic Oral Appliance Therapy for Adults with Obstructive Sleep Apnea", Open Dentistry Journal
-
"Berlin and Epworth Surveys to Predict Obstructive Sleep Apnea for Adults on Biomimetic Oral Appliance Therapy: A Nonrandomized Clinical Trial", International Journal of Dentistry
-
"Comparison of virtual and physical dimensions in AM resin dental devices and fit of devices with conventionally produced base plates", Rapid Prototyping Journal
-
"Cone beam computed tomography changes upon oral appliance therapy for adult patients with obstructive sleep apnea: A non-randomized clinical trial", Medicine
-
"Manufacturing of PEEK orthodontic baseplate and 3D-printed alloy components from an intraoral scan", Medicine (United States)
-
"Oral health knowledge and dental behavior among individuals with autism in Jordan: a case?control study", BMC Oral Health
- Assistant Head of the Center, Director Assistant Office, Sep 2020 - Feb 2021
- Acting Head of the Department, Department of Academic Development, Sep 2020 - Feb 2021
- Acting Head of the Department, Department of Academic Development, Sep 2019 - Sep 2020
- Assistant Head of the Center, Director Assistant Office, Sep 2019 - Sep 2020
- Assistant Dean, Dean assistant, Sep 2018 - Sep 2019
- Assistant Dean, Deanship Of Research, Sep 2017 - Sep 2018
- Faculty Member, Department of Applied Dental Sciences, Nov 2014 - Present
- Helping in registration and settle down of international students, International Office, United Kingdom, Sep 2012- Sep 2014
- Demonstrator, , Teaching Biochemistry, microbiology, and dental Laboratories, United Kingdom, Sep 2011- Sep 2014
- Dental Technician, Jordan University of Science and Technology, Jordan, Jun 2007- Oct 2008
- APPLIED FIXED PROSTHODONTICS (1)
- APPLIED ORTHODONTICS
- APPLIED PARTIAL REMOVABLE PROSTHODONTICS (2)
- DENTAL MATERIALS
- DENTAL MORPHOLOGY & OCCLUSION
- DENTAL MORPHOLOGY & OCCLUSION PRACTICAL
- MAINTENANCE OF EQUIPMENTS AND GENERAL SAFETY IN THE DENTAL TECHNOLOGY LABORATORY
- MAXILLOFACIAL PROSTHODONTICS (1) PRACTICAL
- MAXILLOFACIAL PROSTHODONTICS (2) PRACTICAL
- ORAL & DENTAL HEALTH
- ORTHODONTICS (1)
- ORTHODONTICS (1) (LAB)
- ORTHODONTICS (1) PRACTICAL
- ORTHODONTICS (2)
- ORTHODONTICS (2) (LAB)
- ORTHODONTICS (2)PRACTICAL
- REMOVABLE PARTIAL PROSTHODONTICS (1) PRACTICAL
Conference Duties
- 8th International confernce of Dental Technology, Jordan, Chair
Professional Memberships
- Orthodontic Technician Association, 2016
- JUST academic staff, 2016
- The Association of Jordanian Women Academics, , 2016
|
