×
Sign In
Jubil Logo Accessibility Menu Arabic Search Menu
 
mohammad ahmad omari
• Mechanical Engineering - Acting Head of Department
• Mechanical Engineering - Faculty Member

  • Ph.D. of Mechanical Engineering from New Mexico State University, 2013
  • Msc. of Mechanical Engineering from New Mexico State University, 2011
  • Msc. of Engineering Technology from Yarmouk University, 2006
  • Bsc. of Mechanical Engineering from Jordan University of Science and Technology, 2001

    Publications
  • Yulianto, Ignatius and Omari, Mohammad and Sevostianov, Igor, "Evaluation of changes in dislocation density in TI-CP2 in the process of quasi-static loading using electrical resistance measurements," International journal of fracture, vol. 175, no. , pp. 73-78, 2012, Springer Netherlands
  • Omari, Mohammad A and Sevostianov, Igor, "Evaluation of the growth of dislocations density in fatigue loading process via electrical resistivity measurements," International Journal of Fracture, vol. 179, no. , pp. 229-235, 2013, Springer Netherlands
  • Omari, Mohammad A and Bal{\'a}zs, T{\H{u}}ri and Sevostianov, Igor, "Evaluation of changes in plastic yield parameters of titanium CP-2 using electrical resistivity measurements," International Journal of Fracture, vol. 187, no. , pp. 179-186, 2014, Springer Netherlands
  • Omari, Mohammad A and Sevostianov, Igor, "Estimation of changes in the mechanical properties of stainless steel subjected to fatigue loading via electrical resistance monitoring," International Journal of Engineering Science, vol. 65, no. , pp. 40-48, 2013, Pergamon
  • Al-Omari, Faruq and Al-Jarrah, Mohammad and Omari, Mohammad and Hayajneh, Mohammed, "Development of a CAD/CAM system for simulating closed forging process using finite-element method," Engineering Computations, vol. 26, no. , pp. 302-312, 2009, Emerald Group Publishing Limited
  • Almagableh, Ahmad and AL-Oqla, Faris M and Omari, Mohammad A, "Predicting the effect of nano-structural parameters on the elastic properties of carbon nanotube-polymeric based composites," International Journal of Performability Engineering, vol. 13, no. , pp. 0-0, 2017
  • Omari, Mohammad Ahmad, "Evaluation of changes in microstructure and mechanical performance of metals via electrical resistivity measurements," Ph. D. Thesis, vol. , no. , pp. 0-0, 2013
  • Almagableh, Ahmad and Omari, Mohammad. A. and Awad, Ahmad. S., "Elastic Behavior of Carbon Nanotubes Reinforced Composites: Micromechanical Modeling," Journal of Applied Research on Industrial Engineering, vol. 4, no. , pp. 199-204, 2017
  • Almagableh, Ahmad and Omari, Mohammad A and Sevostianov, Igor, "Modeling of anisotropic elastic properties of multi-walled zigzag carbon nanotubes," International Journal of Engineering Science, vol. 144, no. , pp. 0-0, 2019, Pergamon
  • Omari, Mohammad A and Mousa, Hamzah M and AL-Oqla, Faris M and Aljarrah, Mohammad, "Enhancing the surface hardness and roughness of engine blades using the shot peening process," International Journal of Minerals, Metallurgy, and Materials, vol. 26, no. , pp. 999-1004, 2019, University of Science and Technology Beijing
  • Rababah, Mahmoud and Wasif, Muhammad and Omari, Mohammad and Mutawe, Samer, "A Novel Approach to Profile-Milling for End-Mill Flutes in 4-Axis CNC Turn-Milling Machines, Part I: Mathematical Modeling," International Review of Mechanical Engineering (I.RE.M.E.), vol. 13, no. , pp. 133-141, 2019, praise worthy prize
  • Rababah, Mahmoud and Wasif, Muhammad and Omari, Mohammad and Mutawe, Samer, "A Novel Approach to Profile-Milling for End-Mill Flutes in 4--Axis CNC Turn-Milling Machines, Part II: Simulation and Verification," International Review of Mechanical Engineering (I.RE.M.E.), vol. 13, no. , pp. 203-211, 2019, praise worthy prize
  • Omari, Mohammad A and Almagableh, Ahmad and Sevostianov, Igor and Yaseen, Ahmad Bani and others, "Modeling of the viscoelastic properties of thermoset vinyl ester nanocomposite using artificial neural network," International Journal of Engineering Science, vol. 150, no. , pp. 0-0, 2020, Elsevier
  • Omari, Mohammad A., "Prediction of the Mechanical Properties o f Stainless Steel 304 Subjected t o Fatigue Loading Using Artificial Neural Network," Test Engineering \& Management, vol. 83, no. , pp. 5433-5437, 2020, The Mattingley Publishing Co., Inc.
  • Aljarrah, M and Omari, M and Alkhazali, A, "On the Choice of the Geometrical Extrapolation Models for the Mg-Al-Sr System Based on Experimental Investigation," Materials Research, vol. 23, no. , pp. 0-0, 2020, ABM, ABC, ABPol
  • Almagableh, Ahmad and Faris, M, "AL-Oqla, and Mohammad A. Omari. 2017.?Predicting the Effect of Nano-Structural Parameters on the Elastic Properties of Carbon Nanotube-Polymeric based Composites.?," International Journal of Performability Engineering, vol. 13, no. , pp. 0-0,
  • Almagableh, Ahmad and Omari, Mohammad A, "Mechanical behavior of interfacial stress transfer in platelet-reinforced thermoset polymeric composites," Journal of Composite Materials, vol. 56, no. , pp. 2551-2558, 2022, SAGE Publications Sage UK: London, England
  • Mousa, Hamzah and Omari, Mohammad A, "Investigating the effect of shot peening parameters on the peened surface damage using FEA," Results in Engineering, vol. 19, no. , pp. 0-0, 2023, Elsevier
  • Mousa, Hamzah and Omari, Mohammad A, "Results in Engineering," , vol. , no. , pp. 0-0,
  • Omari, Mohammad A and Abdelrahim, Mutasem M, "Simulation and Optimization of an Aluminum Extrusion Process Using FEM and Artificial Intelligence," , vol. , no. , pp. 0-0, 2023
  • Omari, Mohammad A, Development of a CAD/CAM System for Forging Process, ,
  • Omari, Mohammad A and Al-Omari, Faruq AR, Development of a CAD, , 2006
  • Omari, M. and Sevostianov, I., Evaluation of changes in microstructure and mechanical properties, ISBN 978-3-659-89121-2, 2016
  • Jawaid, Mohammad and Salit, Mohd Sapuan and Alothman, Othman Y and Omari, M., Green biocomposites: design and applications, Springer, 2017
  • Jawaid, Mohammad and Paridah, MT and Saba, Naheed and Omari, M., Lignocellulosic fibre and biomass-based composite materials: processing, properties and applications, Woodhead Publishing, 2017
  • AL-Oqla, Faris and A. Omari, Mohammad, Sustainable Biocomposites: Challenges, Potential and Barriers for Development, Green Biocomposites, Manufacturing and Properties, Springer International Publishing, 2016
  • AL-Oqla, Faris M and Almagableh, Ahmad and Omari, Mohammad A, Design and fabrication of green biocomposites, Green Biocomposites, Design and Applications, Springer International Publishing, 2017
  • AL-Oqla, Faris and Omari, Mohammad and Al-Ghraibah, Amani, Predicting the potential of biomass-based composites for sustainable automotive industry using a decision-making model, Lignocellulosic Fibre and Biomass-Based Composite Materials, ELSEVIER, 2017
  • "A comprehensive study of carbon nanoparticle shape and orientation effects on composite elastic properties using FEA", Materials Research Express
  • "A novel approach for plunging using plungers of predefined geometry", INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING
  • "Enhancing the surface hardness and roughness of engine blades using the shot peening process", AMANI M AL-GHRAIBAH
  • "Investigating the effect of shot peening parameters on the peened surface damage using FEA", Results in Engineering
  • "Mechanical behavior of interfacial stress transfer in platelet-reinforced thermoset polymeric composites", Journal of Composite Materials
  • "Modeling of anisotropic elastic properties of multi-walled zigzag carbon nanotubes", International Journal of Engineering Science
  • "Modeling of the viscoelastic properties of thermoset vinyl ester nanocomposite using artificial neural network", International Journal of Engineering Science
  • "On the Choice of the Geometrical Extrapolation Models for the Mg-Al-Sr System Based on Experimental Investigation ", Materials Research
  • Acting Head of Department, Mechanical Engineering, Sep 2024 - Present
  • Acting Head of Department, Mechanical Engineering, Sep 2022 - Sep 2023
  • Faculty Member, Mechanical Engineering, Sep 2016 - Present
  • Assistant Professor, Hashemite University, Jordan, Aug 2014- Sep 2016
  • College Assistant Professor, New Mexico State University, U.S.A, Aug 2013- Jun 2014
  • Teaching and Research Assistant, New Mexico State University, U.S.A, Aug 2009- Jun 2013
  • Laboratory Engineer, Jordan University of Science & Technology, Jordan, Sep 2002- Aug 2009
  • Foundry Engineer, AEICO LTD, Jordan, Aug 2001- Sep 2002
  • AUTOMATED MANUFACTURING SYSTEMS
  • CONTROL SYSTEMS LAB
  • ENGINEERING MECHANICS
  • ENGINEERING TRAINING
  • ENGINEERING WORKSHOPS
  • INSTRUMENTATION
  • INSTRUMENTATION AND DYNAMIC SYSTEMS
  • MANUFACTURING PROCESSES LAB
  • MECHANICS OF MATERIALS
  • MECHANICS OF MATERIALS 1
  • NUMERICAL METHODS
  • NUMERICAL METHODS FOR CHEMICAL ENGINEERS
  • NUMERICAL METHODS FOR ENGINEERS
  • STATICS
  • STRENGTH OF MATERIALS