Mohammed Ali Almomani

JUST A-Z

mohammed ali almomani

• Industrial Engineering - Faculty Member

• Vice dean - Vice Dean

22539
M5L3 Tel 22539
Industrial Engineering
maalmomani7@just.edu.jo

Website

Research Gate

Google Scholar

Ph.D. of MATERIAL ENGINEERING from University of Wisconsin Milwaukee, 2009
Msc. of Industrial Engineering from University of Jordan, 2004
Bsc. of Mechanical Engineering from Jordan University of Science and Technology, 2000

Publications

M. A. Almomani and C. R. Aita , "Pitting corrosion protection of stainless steel by sputter deposited hafnia, alumina, and hafnia-alumina nanolaminate films," Journal of Vacuum Science & Technology A, vol. 27, no. 3, pp. 449-455, 2009
Adel Mahmood Hassan, Mohammed Almomani, Tarek Qasim and Ahmed Ghaithan, "Statistical analysis of some mechanical properties of friction stir welded aluminium matrix composite," Int. J. Experimental Design and Process Optimisation,, vol. 3, no. 1, pp. 91-109, 2012
Adel Mahmood Hassan, Mohammed Almomani, Tarek Qasim, Ahmed Ghaithan, "Processing Parameters Effect on Friction Stir Welded Aluminum Matrix Composites Wear Behavior," Materials and Manufacturing Process, vol. 27, no. 12, pp. 1419-1423, 2012
Almomani M, Hassan A,Qasim T. , Ghaithan A., "Effect of process parameters on the corrosion rate of friction stir welded aluminum SiC-Gr hybrid composites," Corrosion Engineering Science and Technology Journal, vol. 48, no. 5, pp. 353-364, 2013
Mohammed Almomani; Mohammed Aladeemy; Abdelhakim Abdelhadi; Ahmad Mumani, "A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques," Computers & Industrial Engineering, vol. 66, no. 2, pp. 461-469, 2013
Mohammed Almomani; Abdelhakim Abdelhadi; Ahmad Mumani; Amer Momani; Mohammed Aladeemy, " A Proposed Integrated Model of Lean Assessment and Analytical Hierarchy Process for a Dynamic Road Map of Lean Implementation ," The International Journal of Advanced Manufacturing Technology, vol. 72, no. 1, pp. 161-172, 2014
Mohammed Almomani; Abdelhakim Abdelhadi; Hamid Seifoddini; Yue Xiaohang, "Preventive maintenance planning using group technology," Journal of Quality in Maintenance Engineering, vol. 18, no. 4, pp. 472-480, 2012
Mohammed Ali Almomani, Wai'l Radwan Tyfour, Mohammad Hani Nemrat, "Influence of Graphite Content on Corrosion Behavior of Cartridge Brass in a 3.5 wt.% NaCl Solution," International Jounral of Electrochemical Science, vol. 11, no. 5, pp. 3436-3447, 2016
Mohammed Ali Almomani, Wai'l Radwan Tyfour, Mohammad Hani Nemrat, "Effect of silicon carbide addition on the corrosion behavior of powder metallurgy Cu-30Zn brass in a 3.5 wt% NaCl solution," Journal of Alloys and Compounds, vol. 679, no. 15, pp. 104-114, 2016
Mohammed Almomani, Mohammed Hayajneh, Majd Draidi, "Corrosion Investigation of Zinc Aluminum Alloy Matrix (ZA-27) Reinforced with Alumina (Al2O3) and Fly Ash," Particulate Science And Technology, vol. , no. , pp. 0-0, 2016
Mohammed Almomnai, Mohammed Hayajneh, Majd Draidi, "Tribological Investigation of Zamak Alloys Reinforced with Alumina (Al 2 O 3 ) and Fly Ash," Particulate Science And Technology, vol. 34, no. 3, pp. 317-323, 2016
Adnan Al-Kilani ; Mohammed Almomani, "Machinability of Zinc-Aluminum Alloy,ZAMAK 5 Alloy,Produced by Powder Metallurgy ," 10th International Symposium on Advanced Materials, 2007, pp. 51-56
E.E. Hoppe; M.Almomani; C.R.Aita, "Structure and Optical Behavior of Sputter Deposited Hafnia-Alumina Nanolaminate Films," AVS 55th International Symposium & Exhibition Electronic Materials and Processing, Oct 2008, pp. 0-0, American Vacuum Society
Abdelhakim Abdelhadi;Hamid Seifoddini; Mohammed Almomani, "Part and Inventory Control Analysis Using Plan of Every Part Concept," 3rd International Conference on Industrial Engineering and Operations Management , Jul 2012, pp. 702-709, Industrial Engineering and Operations Management (IEOM)
Mohammed Almomani, Ahmad Shatnawi, Mohammed Alrashdan, "Effect of Sintering Time on the Density, Porosity Content and Microstructure of Copper ? 1 wt. % Silicon Carbide Composites," 2014/2nd International Conference on Advances in Materials Science and Engineering (AMSE 2014), Oct 2014, pp. 0-0
Mohammed Almomani, Dina Al Qudah, "Material Selection for Footwear Insole Using Analytical Hierarchal Process," ICBMC 2016 : 18th International Conference on Biobased Materials and Composites, Apr 2016, pp. 0-0
"Predicting the thermal conductivity of yttria stabilized zirconia thermal barrier coatings using machine learning", International Journal on Interactive Design and Manufacturing

Mohammed Ali Mahbob Almomani, Jenan Abdallah Jameel Hamdan

28/11/2025
"Natural Fiber Epoxy-Based Composite Ballistic Impact Performance Capabilities for Armor System Design: A Comprehensive Review", Jordan Journal of Mechanical and Industrial Engineering

Mohammed Taiseer Daifallah Faleh Hayajneh, Mu'Ayyad Mohammad Izzat Mohammad Al-Shrida, Mohammed Ali Mahbob Almomani

30/08/2025
"A smart selection of the best bio?multilayered armor: an AHP decision model", Journal of Materials Science

Mohammed Ali Mahbob Almomani, Mohammed Taiseer Daifallah Faleh Hayajneh

28/06/2025
"A classification model for predicting course outcomes using ensemble methods", International Journal of Electrical and Computer Engineering

Ala'A Mohammad Aqeel Shatnawi, Mohammed Ali Mahbob Almomani

02/10/2024
"Selecting the best thermal barrier coating material for hot sections in gas turbine using AHP and TOPSIS multi-criteria decision making techniques", The International Journal on Interactive Design and Manufacturing

Mohammed Ali Mahbob Almomani, Qasem Mohammad Qasem Mahafdeh, Abdallah Mohammad Flayyeh Almomani, Omar Mohemmed Daifallah Bataineh

25/06/2024
"Portulaca oleracea leaf extract as a green corrosion inhibitor for mild steel in 1 M HCl", International Journal of Corrosion and Scale Inhibition

Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani, Wala' Mahmoud Hussein Al Sharman

23/05/2024
"Applying ANOVA to Study the Effect of Weight Factions of the Nano-Hafnia Dispersed in Spin Coated Gelatin on the Corrosion Behaviour of AISI 316L Steel", Materials Research

Mohammed Ali Mahbob Almomani, Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammad Younes Ali Al-Daraghmeh

22/09/2023
"Selecting the Best 3D Concrete Printing Technology for Refugee Camp?s Shelter Construction Using Analytical Hierarchy Process: The Case of Syrian Refugees in Jordan", Buildings

Mohammed Ali Mahbob Almomani, Nedal Kamel Baier Al-Ababneh, Khairedin Mustafa Ahmad Abdalla, Nadim Ibrahim Sulieman Shbeeb

17/07/2023
"Ceratonia siliqua pulp extracts as a green corrosion inhibitor for mild carbon steel in 1 M HCl", INTERNATIONAL JOURNAL OF CORROSION AND SCALE INHIBITION

Mohammed Ali Mahbob Almomani, Mohammed Taiseer Daifallah Faleh Hayajneh, Wala' Mahmoud Hussein Al Sharman

25/06/2023
"Groundwater artesian wells allocation: proposing the use of a geographical information system and a dual analytical hierarchical process", Scottish Geographical Journal

Mohammed Ali Mahbob Almomani, Ala'A Hasib Suhail Al Rajjal, Aseel Fayez Yousef Khanfar

13/06/2023
"Selecting the Best Material for Hydrogen Storage Using the Analytical Hierarchical Process", Jordan Journal of Mechanical and Industrial Engineering

Bashar Sami Nimr Elshalabi, Mohammed Ali Mahbob Almomani, Mariam Ibrahim Salem Abo Awwad

30/05/2023
"A study on Jordanian green natural agrowastes as potential inhibitors of mild steel corrosion in hydrochloric acid solution", Green Materials

Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani, Wala' Mahmoud Hussein Al Sharman

28/04/2023
"Toward a Rapid and Sustainable Recovery in the Tourism Industry Using Lean Manufacturing Principals", Applied Sciences

Mohammed Ali Mahbob Almomani, Eman Muhammed Kayed Al Shatnawi

16/02/2023
"Effect of electrode parameters in the electro-production of reactive oxidizing species via boron-doped diamond under batch mode", WATER ENVIRONMENT RESEARCH

Ahmad Ayyoub Ahmad Bany Abdelnabi, Nader Ahmad Bakheet Al Theeb, Mohammed Ali Mahbob Almomani

17/12/2022
"Fabrication of functionally graded injection molds using friction stir molding process of AA5083/brass?laminated composite", Progress in Additive Manufacturing

Esraa Saleh Abdel Qader Abdel All, Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani

10/06/2022
"Toward long-live ceramic on ceramic hip joints: In vitro investigation of squeaking of coated hip joint with layer-by-layer reinforced PVA coatings", e-Polymers

Mohammed Ali Mahbob Almomani, Mohammad Mousa Hasan Fares, Elham Mohamed Hwaishel Almesidieen

27/04/2022
"Predicting the Corrosion Rate of Medium Carbon Steel Using Artificial Neural Networks", Protection of Metals and Physical Chemistry of Surfaces

Mohammed Ali Mahbob Almomani, Amer Mohammad Suliman Momani, Ahmad Ayyoub Ahmad Bany Abdelnabi, Ruba Sari Ahmad Alzqebah

12/08/2021
"Mechanical and corrosion characteristics of grain refined ZA-27 alloy and ZA-27/Al2O3 nano-composite produced by ultrasonic cavitation technique", KOVOVE MATERIALY-METALLIC MATERIALS

Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani, Audai Abed Al-Qader Salem Al-Akailah

10/06/2021
"Mechanical Properties and Corrosion Behavior of Stir Casted Composites of ZA-27 Alloy Reinforced with Al2O3 Nanoparticles", Protection of Metals and Physical Chemistry of Surfaces

Mohammed Ali Mahbob Almomani, Mohammed Taiseer Daifallah Faleh Hayajneh, Audai Abed Al-Qader Salem Al-Akailah

03/05/2021
"An analytic hierarchy process model for selecting adsorbent for heavy metal ion removal from wastewater", Water S.A.

Shereen Saleh Mohammad Ababneh, Omar Mefleh Mohammad Al-Araidah, Mohammed Ali Mahbob Almomani

12/06/2020
"Synthesis and characterization of ZA-27/SiC nanocomposites and study of its anticorrosion performance in a 3.5% NaCl medium", Anti-Corrosion Methods and Materials

Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani, Shrouq Mohammad Ali Alelaumi

08/03/2020
"Investigation of mechanical and tribological properties of hybrid green eggshells and graphite-reinforced aluminum composites", Journal of the Brazilian Society of Mechanical Sciences and Engineering

Mohammed Ali Mahbob Almomani, Mohammed Taiseer Daifallah Faleh Hayajneh, Mu'Ayyad Mohammad Izzat Mohammad Al-Shrida

03/12/2019
"Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution", Materials Research

Mohammad Younes Ali Al-Daraghmeh, Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani

02/10/2019
"Corrosion evaluation of nanocomposite gelatin-forsterite coating applied on AISI 316L stainless steel", Materials Research Express

Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani, Heba Bassam Suleiman Al_Hmoud

01/10/2019
"Applying Taguchi method to study the wear behaviour of ZA-27 alloy-based composites reinforced with SiC nanoparticles", International Journal of Cast Metal Research

Mohammed Ali Mahbob Almomani, Mohammed Taiseer Daifallah Faleh Hayajneh, Shrouq Mohammad Ali Alelaumi

05/07/2019
"Effects of Waste Eggshells addition on Microstructures, Mechanical and Tribological Properties of Green Metal Matrix Composite", MOHAMMED T. HAYAJNEH

Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammed Ali Mahbob Almomani, Mu'Ayyad Mohammad Izzat Mohammad Al-Shrida

21/05/2019
"The corrosion behavior of AISI 304 stainless steel spin coated with ZrO2 -Gelatin nanocomposites", Materials Research Express

Mohammed Ali Mahbob Almomani, Mohammed Taiseer Daifallah Faleh Hayajneh, Mohammad Younes Ali Al-Daraghmeh

06/11/2018
"Applying ANOVA and DOE to study the effect of manganese on the hardness and wear rate of artificially aged Al-4.5wt%Cu alloys", International Journal of Cast Metals Research

Omar Mohemmed Daifallah Bataineh, Mohammed Ali Mahbob Almomani

04/08/2017
"Preparation, characterization, nanostructures and bio functional analysis of sonicated protein co-precipitates from brewers? spent grain and soybean flour", Food Chemistry

Muhammad Hussein Muhammad Al-U'Datt, Sana Issa Bakhit Gammoh, Taha Mohammad Alahmad Rababah, Mohammed Ali Mahbob Almomani, Mohammad Noor Sulaiman Alhamad, Neveen Mustafa Trad Hussein, Sura Abdelnaser Mohammad Abunaser

01/08/2017
"A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques", Computers and Industrial Engineering

Mohammed Ali Mahbob Almomani, Mohammed Ameen Abdulqader Aladeemy, Ahmad Abdelhafiz Mohammad Mumani

25/07/2013

Vice Dean, Vice dean, Sep 2025 - Present
Vice Dean, Vice dean, Sep 2024 - Sep 2025
Head of Department, Industrial Engineering, Sep 2021 - Sep 2022
Acting Head of Department, Industrial Engineering, Sep 2020 - Sep 2021
Acting Head of Department, Industrial Engineering, Sep 2019 - Sep 2020
Acting Head of Department, Industrial Engineering, Sep 2018 - Sep 2019
Assistant Dean, Dean assistance office, Sep 2017 - Sep 2018
Assistant Dean, Dean assistance office, Sep 2016 - Sep 2017
Faculty Member, Industrial Engineering, Feb 2010 - Present

ADV. MATERIALS SCIENCE
ADVANCED ENGINEERING MATERIALS.
ADVANCED MANUFACTURING PROCESSES
APPLIED ENGINEERING STATISTICS
APPLIED STATISTICS
DYNAMICS AND VIBRATION
DYNAMICS AND VIBRATIONS
ENGINEERING MATERIAL LAB
ENGINEERING MATERIAL(LAB)
ENGINEERING MATERIALS
ENGINEERING MATERIALS AND THEIR INDUSTRIAL APPLICATION
ENGINEERING MATERIALS LAB
ENGINEERING PRACTICE
ENGINEERING TRAINING
HUMAN FACTORS LAB
INTRODUCTION TO BIOMEDICAL MATERIALS
LEAN AND AGILE PRODUCTION SYSTEMS
LEAN PRODUCTION SYSTEMS
MANUFACTURING PROCESSES (1)
MANUFACTURING PROCESSES (2)
MANUFACTURING PROCESSES LAB
MATERIALS SCIENCE
MATERIALS SCIENCE AND ENGINEERING
MECHANICS OF MATERIALS 2
METROLOGY
PROJECT MANAGEMENT
RELIABILITY AND MAINTENANCE MANAGEMENT
WORK MEASUREMENT AND ANALYSIS