×
khaled mahmoud bataineh
• Mechanical Engineering - Faculty Member

  • Ph.D. of Mechanical Engineering from University of Pittsburgh, 2005
  • Msc. of Mechanical Engineering from Carnegie Mellon University, 2002
  • Bsc. of Mechanical Engineering from Jordan University of Science and Technology, 1999

    Publications
  • Khaled M. Bataineh, "2D Navier?Stokes Simulations of Microscale Viscous Pump With Slip Flow," ASME Journal of Fluids Engineering, vol. 131, no. 5, pp. 51105-51106, 2009
  • Khaled M. Bataineh, "Fuzzy logic approach to provide safe and comfortable indoor environment," International Journal of Engineering, Science and Technology, vol. 2, no. 7, pp. 65-72, 2010
  • Khaled M. Bataineh, "A comparison study between various fuzzy clustering algorithms," Mechanical and Industrial Engineering (JJMIE), vol. N/A, no. N/A, pp. 0-10, 2010
  • Khaled M. Bataineh, "Micro scale falling cylinder viscometer with slip boundary," Journal of fluid engineering ASME., vol. 132, no. 8, pp. 5-10, 2010
  • Khaled M. Bataineh, "Double - disk rotating viscous micro- pump with slip flow," MICROSYSTEM TECHNOLOGIES, vol. 16, no. 10, pp. 1811-1819, 2010
  • Khaled Bataineh , Doraid Dalalah, "Optimal Configuration for Design of Stand-Alone PV System," Smart Grid & Renewable Energy, vol. 3 , no. 2, pp. 0-0, 2012
  • Yazan Taamneh, Khaled M. Bataineh, " Drag and Separation Flow past Solid Sphere with Porous Shell at Moderate Reynolds Number," Transport in Porous Media, vol. , no. , pp. 1-13, 2011
  • D. AL-Tahat and KHALED M. BATAINEH, "Statistical Analyses and Modeling of the Implementation of Agile Manufacturing Tactics in Industrial Firms," Mathematical Problems in Engineering, vol. , no. , pp. 0-0,
  • Khaled M. Bataineh, Amr Hamzeh , "Efficient Maximum Power Point Tracking Algorithm for PV Application Under Rapid Changing Weather Condition," ISRN Renewable Energy, vol. , no. , pp. 0-0, 2013
  • Khaled Bataineh, "Numerical Simulations for Average Temperature Differential Stirling Engine," Journal of Technology Innovations in Renewable Energy, vol. , no. , pp. 0-0, 2013
  • Khaled Bataineh, Doraid Dalalah, "Assessment of wind energy potential for selected areas in Jordan ," Journal of Renewable energy, vol. 59, no. , pp. 75-81, 2013
  • Wafa Batayneh, Omar Al-Araidah, Khaled Bataineh, Adnan Al-Ghasem, "Fuzzy-Based Adaptive Cruise Controller with Collision Avoidance and Warning System," Mechanical Engineering Research,, vol. 3, no. , pp. 0-0, 2013
  • Khaled M. Bataineh, "Edge effect in cone and plate rheometer ," the Int. J. Fluid Mech. Resch, vol. 39, no. 5, pp. 0-0, 2012
  • Doraid Dalalah, Mohammad Al-Tahat, Khaled Bataineh, "Mutually Dependent Multi-Criteria Decision Making," International Journal of Fuzzy information and Engineering, vol. 4, no. 2, pp. 0-0, 2012
  • Doraid Dalalah, Samir Khrais, Khaled Bataineh, "Waste Minimization in Irregular Stock Cutting," Journal of Manufacturing Systems., vol. , no. , pp. 0-0, 2013
  • Khaled M. Bataineh, Yazan Taamneh, "Novel Rotating Cone Viscous Micropump," International Journal of Engineering Systems Modelling and Simulation., vol. , no. , pp. 0-0,
  • Khaled M. Bataineh, "Micro scale cone-plate viscometer with slip flow," International science and technology Conference, ISTEC-2010, 2010, pp. 0-0
  • Khaled M. Bataineh, "Thermal Performance of Building attached Sunspace in Jordan Climate," The 1sl International Nuclear and Renewable Energy Conference (INREC' 10)., 2010, pp. 0-0
  • Khaled M. Bataineh, "Effect of Slip Factors in Hydrodynamic Behaviors of basic Micro-Flows Probl," WSEAS, Sep 2011, pp. 0-0
  • Khaled M. Bataineh, "Edge Effect in Micro Cone and Plate Viscometer with Slip Flow," International Conference on Fluid Mechanics, Apr 2012, pp. 0-0
  • Khaled Bataineh, Amr Hamzeh, "Efficient maximum power point tracking algorithm for photovoltaic cells ," 1st WSEAS International Conference on Industrial and Manufacturing Technologies, May 2013, pp. 0-0
  • "A Three ? Dimensional Finite Element Analysis of Polyetheretherketone PEEK in Dental Implant Prosthesis: A Novel Implant System", The Open Dentistry Journal
  • "A cost effective approach to design of energy efficient residential buildings", Frontiers of Architectural Research
  • "A new numerical thermodynamic model for a beta-type Stirling engine with a rhombic drive", THERMAL SCIENCE AND ENGINEERING PROGRESS
  • "An Intelligent Maximum Power Point Using a Fuzzy Log Controller under Severe Weather Conditions", INTERNATIONAL JOURNAL OF PHOTOENERGY
  • "An improved hybrid algorithms based maximum power point tracking algorithm for PV system operating under severe weather conditions", IET Power Electronics
  • "Analysis of thermal performance of building attached sunspace", Energy and Buildings
  • "Assessment of wind energy potential for selected areas in Jordan", RENEWABLE ENERGY
  • "Combined convection heat transfer in a lid driven cavity filled with nanofluids", heat transfer
  • "Design optimization of energy efficient residential buildings in Mediterranean region", Journal of Sustainable Development of Energy, Water and Environment Systems
  • "Effect of different biocompatible implant materials on the mechanical stability of dental implants under excessive oblique load", Clinical Implant Dentistry and Related Research
  • "Fatigue Resistance of 3-Unit CAD-CAM Ceramic Fixed Partial Dentures: An FEA Study", Journal of prosthodontics
  • "Improving the performance of direct contact membrane distillation utilizing spacer-filled channel", Desalination
  • "Improving the performance of solar still by using nano?uids, vacuuming, and optimal basin water thickness", Desalination and Water Treatment
  • "Life-Cycle Assessment of Recycling Postconsumer High-Density Polyethylene and Polyethylene Terephthalate", Advances in Civil Engineering
  • "Mathematical formulation of alpha -type Stirling engine with Ross Yoke mechanism", Energy
  • "Mixed Convection Heat Transfer in a Square Lid-Driven Cavity Filled with Al2O3 Water Nanofluid", Strojniki vestnik/Journal of Mechanical Engineering
  • "Novel in- Situ heating transmission electron microscope holder for atomic resolution", MECHANIKA
  • "Optimal design for sensible thermal energy storage tank using natural solid materials for a parabolic trough power plant", Solar Energy
  • "Optimization Analyses of Parabolic Trough (CSP) Plants for the Desert Regions of the Middle East and North Africa (MENA) ", Jordan Journal of Mechanical and Industrial Engineering
  • "Performance analysis of solar still integrated with internal reflectors and fins", Solar Energy
  • "Performance evaluation of a stand-alone solar dish Stirling system for off?grid electrification", Energy Sources, Part A: Recovery, Utilization and Environmental Effects
  • "Theoretical and experimental investigations on single slope solar still", Desalination and Water Treatment
  • "Thermodynamic analysis of a combined cycle power plant located in Jordan: A case study", Archives of Thermodynamics
  • Head of Department, Mechanical Engineering, Sep 2023 - Dec 2023
  • Faculty Member, Mechanical Engineering, Sep 2006 - Present
  • ADVANCED APPLIED MATHEMATICS
  • ADVANCED CONTROL SYSTEMS
  • ADVANCED HEAT TRANSFER
  • AIRCRAFT STRUCTURES( 1)
  • APPLIED MATH FOR ENGINEERS
  • APPLIED MATHEMATICS FOR MECHATRONICS ENG
  • CONTROL SYSTEMS LAB
  • DESIGN OF THERMAL SYSTEMS
  • ENGINEERING DRAWING
  • ENGINEERING MECHANICS
  • FLUID MECHANICS
  • FLUID MECHANICS (1)
  • INDUSTRIAL AUTOMATION
  • INSTRUMENTATION AND DYNAMIC SYSTEMS
  • INSTRUMENTATION LAB
  • INTERMEDIATE FLUID MECHANICS
  • INTERMEDIATE HEAT TRANSFER
  • MACHINE DESIGN
  • MACHINE DESIGN ( 1)
  • MACHINE DESIGN (2)
  • MECHANICAL VIBRATIONS
  • MECHANICS OF MATERIALS
  • METROLOGY
  • MODELLING AND SIMULATION OF DYNAMIC SYSTEMS
  • PROJECTS IN MACHINE DESIGN
  • STATICS
  • STRENGTH OF MATERIALS
  • STRENGTH OF MATERIALS LAB
  • SUSTAINABLE ENERGY CONVERSION
  • SYSTEM MODELLING AND SIMULATION
  • THERMO FLUID LAB
  • THERMO FLUIDS LAB